Skip to main content Skip to navigation

Overview
Down Arrow Up Arrow

Overview

The software that controls the BD FACSLyric™ Flow Cytometry System comprises two applications, BD FACSuite™ Clinical Application and BD FACSuite™ Application. Both applications provide an easy-to-use interface for data acquisition and analysis with the BD FACSLyric™ System.

 

The BD FACSuite™ Clinical Application supports BD IVD assays with predefined assay templates. 

 

The BD FACSuite™ Application is designed for user-defined assays and collaboration through the unique assay transfer feature, providing simple, reproducible and transferrable assay setup facilitating instrument-to-instrument and site-to-site standardization.

 

Functions included in both applications, including password protection, audit trail, electronic signatures and IQ/OQ procedures, assist in supporting 21 CFR Part 11 compliance and electronic record integrity.

performance1

FEATURES

The BD FACSuite™ Clinical Application provides a streamlined workflow, predefined assay templates for BD IVD assays, and comprehensive reporting

A streamlined workflow

BD® CS&T Beads are used to check cytometer performance and automatically make adjustments, ensuring consistent instrument setup from day to day. They are also used to perform comprehensive checks during system initialization and setup, including performance QC; verify system performance; and trigger the automated laser alignment process if required. This functionality is enabled by the BD FACSuite™ Clinical Application and ensures the entire setup process can be performed without manual intervention.

 

Predefined assay templates and comprehensive reporting

Assay modules with predefined templates optimized for use with specific BD IVD reagent kits can be installed on the BD FACSuite™ Clinical Application. These templates feature automated gating, calculations and report generation.

performance1

APPLICATION

The BD FACSuite™ Application provides a streamlined workflow and automated standardization enabling collaboration

A streamlined workflow

BD® CS&T Beads are used to perform comprehensive checks during system initialization and setup, including performance QC; verify system performance; ensure that detector settings are optimal; and trigger the automated laser alignment process if required. This functionality enabled by the BD FACSuite™ Application ensures the entire setup process can be performed without manual intervention.

 

Spillover value measurement is performed every 60 days using predispensed dried BD® FC Beads. Spillover values are maintained within the software and updated automatically with PMTV changes.

 

Standardization and collaboration

Universal setup is an automated system that establishes and maintains instrument MFI target values on a single instrument using the BD FACSuite™ Application, BD® CS&T Beads and BD® FC Beads, allowing for reproducible and consistent results within and between BD FACSLyric™ instruments over time.

 

 

Highly reproducible results between BD FACSLyric™ instruments drive standardization

 

BD FACSLyric™ System Variance (CVs)
15 BD FACSLyric™ Systems: Lyse/Wash settings and BD® FC Beads
Blue Laser%CVRed laser%CVViolet laser%CV
FITC4.2APC5.3BD Horizon™ V45011.1
PE4.4APC-Cy74.1BD Horizon™ V50011
PE-Cy74.8APC-H73.9BD Horizon™ BV60513.6
PerCP10.2APC-R7004.2BD Horizon™ BV7117.5
PerCP-Cy5.57.9  BD Horizon™ BV78615.3

Between-instrument reproducibility of target MFI values on the BD FACSLyric™ Systems

 

Lyse/wash assay settings were imported across 15 instruments to show effects of standardization on beads. The CVs of the fluorescence intensity across all channels varies by less than 15.3%. Daily QC with one lot of BD® CS&T Beads was run on fifteen BD FACSLyric™ Cytometers. For each instrument, the PMTV gains were automatically adjusted to meet the target values. BD® FC Beads acquired on each BD FACSLyric™ Instrument. The MFI of positive populations was measured for all parameters across all instruments. The %CV is shown.

 

The data for this internal study were acquired using BD® FC Beads across 15 instruments. Greater between-instrument variability could be observed when running biological samples, when using non BD reagents or when comparing fewer instruments.

BD FACSuite™ Application Academy
Down Arrow Up Arrow

Welcome to the BD FACSuiteApplication Academy, a learning portal dedicated to delivering up-to-date insight on the BD FACSuite Application. As we continue to make improvements, we want to keep you updated on all that the software has to offer. The BD FACSuite Application Academy provides valuable knowledge and is a great source of how-to and training videos all from a single online location. It is also a gateway to special on-demand webinars and special workshop events we offer to further guide you. Please visit often and keep your laboratory up to date on the BD FACSuite Application.


Concatenation: Create a new FCS file by merging multiple files together   

 
performance1


Reporting: Create a custom analysis report

 
performance1


Drill down: Create a gated plot directly from the parent gate

 
performance1


Apply gate positions: Define gate locations in one  entry and apply those locations to other entries

 
performance1


Laser setup: Align your own lasers using BD® CS&T Beads

 
performance1


Ordering populations: Choose the order of viewed populations in a plot

 
performance1

Setup cleanup: Remove setup data that is no longer needed to improve software performance

 
performance1

SIT flushes: Customize the number of SIT flushes between tubes

 
performance1

 

 

BD FACSLyric™ Flow Cytometers are Class 1 Laser Products.

The BD FACSLyric™ Flow Cytometer is for In Vitro Diagnostic Use with BD FACSuite™ Clinical Application for up to six colors. The BD FACSLyric™ Flow Cytometer is for Research Use Only with BD FACSuite™ Application for up to 12 colors. Not for use in diagnostic or therapeutic procedures.

Cy is a trademark of Global Life Sciences Solutions Germany GmbH or an affiliate doing business as Cytiva.